- Single: Stucco Molding – LED Cove Cornice Profile, Raw EPS, 96" (Single)
- 12-pack: Stucco Molding – LED Cove Cornice Profile, Raw EPS, 96" (12-Pack)
Short description
A large foam cornice for the edge where wall meets ceiling, with a built-in cove that hides LED strip lighting. Cut from EPS foam in Knoxville, TN and supplied raw (uncoated), ready for you to coat, plaster or paint.
Description
The Stucco Molding is a 16.25" × 7.25" cornice profile that sits along the top of a wall where it meets the ceiling. Its cove shape leaves room for an LED strip, so light washes up onto the ceiling with no visible source. Use it for indirect cove lighting, plaster-look cornices or bold architectural trim in homes, restaurants, retail and hospitality spaces.
It is cut from expanded polystyrene (EPS), so it is light and easy to handle. You can cut it to length with a fine-tooth saw or hot knife and fix it with a foam-safe construction adhesive.
Uncoated – please read
This profile ships as raw EPS foam with no hardcoat. Before painting, seal it with a foam-compatible primer, a plaster skim or an acrylic stucco finish. Solvent-based paints and adhesives will melt EPS. Raw EPS is not suitable for outdoor use without a protective coating.
Specifications
- Profile: 16.25" × 7.25" (412.75 × 184.15 mm)
- Length: 96" (2440 mm) per piece
- Material: EPS (expanded polystyrene), uncoated
- Made in USA – Knoxville, TN
- Not included: LED strip, driver, adhesive and coating (sold separately)
Pack section – Single
Sold per 96" length, ideal for samples, repairs or small runs. For larger projects, the 12-pack has a much lower price per piece.
Pack section – 12-Pack
Twelve 96" lengths (96 linear ft), roughly enough for the perimeter of a 24' × 24' room before corner waste. This is the best price per piece, because the profiles are cut as one batch.
Shipping
Because of its size, this item ships by LTL freight on a pallet.
Custom
Need a different size or profile? We cut custom EPS shapes. Contact us for a quote.